Product Description

Battery Heavy Object Impact Tester--- Haida battery test equipment manufacturer supply crush nail penetration tester, traction battery drop Tester, Walk in dust-proof test chamber and other equipments.

Product Info

Unit USD
Minorder 1
Supplyability 150 Set/Sets per Month
Port shenzhen
Certification ISO,CE
Place Guangdong, China
Packaging Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.

Product Detail


Battery Heavy Object Impact Tester is placed on the impact table and fixed in the fixture (the largest surface of the battery pack should be perpendicular to the table top). The weight of the 10kg weight is freely dropped from 1.0m. The battery pack is allowed to deform, and it should not ignite or explode.


UL 1642:2012; UL 2054:2012; IEC 62281:2004   


Item Specification
Weight of falling ball 9.1kg±0.46kg (20±1 lb) and 10kg
Impact height 610~1000mm
Height display through the altimeter display, accurate ± 5mm
Horizontal bar 15.8 ± 0.2mm (5 / 8 inch) steel rod
Internal material stainless steel plate
External material cold-rolled sheet paint treatment, thickness 1.5mm
Exhaust air outlet diameter 100mm
Max. size of test battery 250 * 250 * 250mm
Protection device upper and lower limit protection switch, safety block, located at the bottom of the weight, play a protective role in the event of sudden power failure
Viewing window 250mm * 250mm
Machine dimension(L*W*H) 700*800*1650mm
Power supply 1-phase, 220V, 50Hz


Products Categorys

Recommend Products