Product Description

Battery rapid temperature change test chamber  is ideally suited for specimen test requiring quick changes of temperature. It can evaluate the failure of thermal mechanical properties of product. Normally, the temperature rate is less than 20℃/min, which can achieve the real application environment of testing sample by the fast ramp rate.
 

Product Info

Unit Set
Minorder 1
Supplyability 20 sets/Month
Payment L/C ,T/T ,D/A, D/P ,Western Union , MoneyGram ,ect.
Port Shenzhen
Certification ISO ,CE
Place Guangdong, China
Packaging Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.

Product Detail

                                                                                       Battery Rapid Temperature Change Test Chamber


TECHNICAL PARAMETER
 
Item Specification
Internal Dimension (W*D*H) 1000*800*1000mm
External Dimension (W*D*H) 1580*1700*2260mm
Working Capacity 800 liter
Material of Internal Chamber SUS#304 stainless steel, mirror finished
Material of External Chamber stainless steel with paint spray
Temperature Range -20℃~+120℃
Temperature Fluctuation ±1℃
Heating Rate 5℃/min
Cooling Rate 5℃/min
Sample Tray SUS#304 stainless steel, 3pcs
Testing Hole diameter 50mm, for cable routing
Power three-phase, 380V/50Hz
Safety Protection Device leakage
over-temperature
compressor over-voltage and overload
heater short circuit


TEMPERATURE RAMP SYSTEM (HEATING & COOLING)
 
Item Specification
Cooling Speed (+150℃~-20℃) 5℃/min, non-linear control (without loading)
Heating Speed (-20℃~+150℃) 5℃/min, non-linear control (without loading)
Refrigeration Unit System air-cooled
Compressor Germany Bock
Expansion System electronic expansion valve
Refrigerant R404A, R23


APPLICATION

1. To simulate test environment with different temperature and humidity.
2. Cyclic test includes climatic conditions: holding test, cooling-off test, heating-up test, and drying test.


DESIGN FEATURES OF THE CHAMBER

1. It has cable ports are provided on the left side to allow easy wiring of specimens for measurement or voltage application.
2. The door equipped with hinges preventing auto-closing.
3. It can designed to comply with major environmental test standards like IEC, JEDEC, SAE and etc.
4. This chamber is safety tested with CE certificate.


PROGRAMMABLE CONTROLLER

1. It adopts high-precision programmable touch screen controller for easy and stable operation.
2. Step types includes ramp, soak, jump, auto-start, and end.


COMPANY INTRODUCTION

HAIDA INTERNATIONAL is a professional manufacturer of various kinds of testing equipment for 17 years. HAIDA products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and applicable to all scientific research units, quality inspection institutions and academic fields.


 

Products Categorys

Recommend Products

Navigation