UV Aging Chamber
UV Aging Chamber simulates damaging effect of long term outdoor exposure of materials and coatings by exposing test samples to varying conditions of the most aggressive components of weathering - ultraviolet radiation, moisture and heat.
|Packaging||Each set protected by resin fiber and PP film, then put into Strong wooden case with operation manual and vedio inside.|
UV Aging Chamber
Product DescriptionUV Aging Chamber reproduces sunlight, rain and dew, uses fluorescent ultraviolet lamps to simulate the effect of sunlight, and uses condensation humidity to simulate rain and dew. The aging of the sample is accelerated by exposing the sample to alternating cycles of light and moisture and controlled high temperature. Touch screen display and control panel, irradiance control. Optional water spray system.
|Chamber dimension (W*D*H)||1300*500*1460mm|
|Chamber material||SUS#304 stainless steel|
|Temperature range||RT to 70℃|
|Controller||Programmable controller, LCD touch screen|
|Control mode||Balance temperature humidity control (BTHC)|
|Test cycle setting||Exposure, condensation and water spray test cycle is programmable|
|Water spray cycle||Spray 18mins in every 120mins / spray 12mins in every 60mins|
|Distance from sample to lamp||55±2mm|
|Centre distance between lamps||65~70mm|
|UV lamps||Imported Atlas UV-A: 315-400nm (8pcs, 1600h lifetime)|
|Specimen Size||75×290mm (24pcs) / 75x150mm (48pcs), maximum thickness 5mm|
|Testing time||0~999H, adjustable|
|Protection system||Overload short circuit protection
Over temperature protection
Water lacking protection
Earth leakage protection
Auto shut off protection
- Simulate the sun, rain spray and condensation resulting damage to test the materials by exposure to sunlight with moisture and temperature.
- To get the results of damage after several days or weeks which is equal to expose to outside for a few months. The damages include fading, discoloration, brightness down, powder, crack, blur, brittle, strength decreases and oxidation.
- Provide reference with testing data for improvement of existing materials, or to assess the impact of changes in product durability and other aspects.
ISO 4892-3 ASTM G154