Product Description

Sand and Dust Test Chamber is widely used to do dust resistance of electronics, auto components, sealed products when using, storge and transportation.

Product Info

Minorder 1
Place Guangdong, China
Packaging Each set protected by resin fiber and PP film, then put into Strong wooden case with operation manual and vedio inside.

Product Detail

Walk-in Sand and Dust Test Chamber 



Product Description
Sand and Dust Test Chamber is widely used to do dust resistance of electronics, auto components, sealed products when using, storge and transportation.


Product Parameters

 

Item Specification
Internal chamber size (W*D*H) 1500*1500*2300mm
External chamber size (W*D*H) 2200*2000*3200mm
Chamber door Double door (size 1200*2000m) with observation window in tempered glass, single door size 600*2000mm
Temperature range Ambient+10℃ to 70℃ with heating system
Air flow velocity <2m/s
Dust quantity 2~4kg/m3
Dust Talcum powder (pass mesh hole 75um, mesh metal wire diameter 50um)
Testing time 1s~999hr, adjustable
Internal chamber material SUS#304 stainless steel
External chamber material Stainless steel
Specimen pressure difference A lower than atmosphere pressure 0.98KPa, or B no pressure difference
Vacuum system Pressure gauge, air filter, Pressure regulating FRL, connecting pipe, Vacuum pump
Controller PLC controller, touch screen
Operation mode: program and fixed
Cable port Diameter 50mm for sample cable routing
Protection device Motor fan overcurrent alarm
Power phase protection
Auto stop and cut off power
U-stop for emergency
Power supply Three-phases, 380V, 50Hz
Test criteria IEC 60529 – IP5X & 6X
Chamber type Assembly type, ship in parts and assemble at buyer site

 

Chamber structure
Programmble Dust Testing Chamber
1, Chamber material: SUS#304 stainless steel;
2, Transparent window is convenient to observe specimen during testing;
3, Blow fan adopts stainless steel shell, high sealing and wing speed, low noise;
4, Inside the shell is the funnel type, vibration cycle can be adjusted, dust free float in the sky falling to blowing the hole together.

 

Detail Image



 

Working condition

Programmable Dust Testing Chamber
1, Temperature: 15~35 ℃; Relative humidity: 25%~75% R. H;
2, Without strong vibration and Electromagnetic effect around;
3, Test chamber should be stable placed and keep balance;
4, Installation place should keep good ventilation, and without strong airflow, high dust and corrosive material.


FAQ

How to install and use the product?

The product is shipped with an operating instructions and video of English version.or we will send you an operation video to teach you how to install and use the product with English speaking. However, if you need us to teach you face to face, please let us know in advance.

How about the packing for machine, is it safely protected during transportation?
Our machine is packed by standard export wooden box, it won’t be damaged. We’ve delivered many testing machines abroad by sea or by air without damage.

What is the order process?
Inquiry - quotation - communication - order confirming - deposit payment - production - testing and debugging - balance payment - packing - delivery - customer receiving - after service.



 

Products Categorys

Recommend Products

Navigation